Key Features

Fitting is furnished complete with rain go seals
Insertion marks indicate correct placing of gutter to allow for expansion
Lightweight and cuts with a handsaw
Only a few common household tools needed for installation
Systems come in white or brown, but can be painted if desired
Weather performance guaranteed
Will not chip, corrode, or dent

Brown vinyl gutter drop outlet. Used to connect Raingo gutter with 2-1/2 inch square Raingo downspout. This support fitting is designed with Raingo seals and fitting marks that indicate the correct placing of gutter to give required expansion allowance.

Key Features

Basic gutter support fitting
Has patented button on front for alternate use with part RW-108
Lightweight and cuts with a handsaw
Only a few common household tools needed for installation
Recommended to be installed every 30 in of gutter length
Systems come in white or brown, but can be painted if desired
Weather performance guaranteed
Will not chip, corrode, or dent

White Vinyl Raingo Symetrical Gutter Brackets. These gutter support fittings should be installed every 30 inches of gutter length. For alternate use with gutter strap HRW108 to use for roof mount where no facia board exists.

Key Features

Deep cut style holes saws will cut 2x material in 1 pass
Only a few common household tools needed for installation
Weather performance guaranteed
White systems come in white or brown, but can be painted if desired
Will not chip, corrode, or dent

White Raingo symetrical gutter inside end caps left or right. Used with a gutter fitting to make a gutter end either right or left.

Key Features:

Can be installed directly on end of roof rafter
Designed to compensate for the slope in roofs constructed with non-vertical fascia or no fascia at all
For use with Rain go and Regency gutter systems only
Lightweight and cuts with a handsaw
Only a few common household tools needed for installation
Systems come in white or brown, but can be painted if desired
Weather performance guaranteed
Will not chip, corrode, or dent
White vinyl gutter bracket spacers are designed to compensate for the slope in roofs constructed with no vertical fascia or no fascia at all. Can be installed directly on end of roof rafter in installations that have no fascia board.

25 pack, #10 by 1 inch rustproof screws, used for mounting all brackets and fittings, bagged. Used for mounting brackets and fittings on Raingo and Repla K systems. Estimate 3 bags per 100 feet of gutter.